Jump to content

Bobbin winder problem


dickiesdarlin

Recommended Posts

I have the turbo bobbin winder and am having problems with it. After bobbin is about half full the winder slows down to almost a stop without filling the bobbin.I have loosened the tension knob but it still slows down. I don't want to burn it out but don't know what to do besides loosening the knob. Any suggestions? I have used several different threads, So fine, bottom line, glide, all with same results. Thanks

Jeanne

Link to comment
Share on other sites

I just fixed that problem on mine. Unthread it. Put your thread through the top hole the take thread to the RIGHT then between the disks, to the LEFT and around back to the right again then put through the bottom hole. Then proceed to wind a bobbin. I am now able to tighten it all the way. Hope this helps. It certainly fixed mine. Carol

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...