Neys1965 Posted December 23, 2016 Report Share Posted December 23, 2016 Newbie still trying to get in my groove but feel like my table is too low. The front roller is about 2" below my belly button and my arms are not at 90 degree angle. ( yes, I'm tall and long waisted). How long are the adjustable legs on the APQS Freddie? I even think I'd prefer it higher than 90 degrees... Link to comment Share on other sites More sharing options...
T Row Studio Posted December 23, 2016 Report Share Posted December 23, 2016 from the floor to the top of my front roller it measures 38 1/2" Link to comment Share on other sites More sharing options...
LisaC Posted December 23, 2016 Report Share Posted December 23, 2016 My favorite height is when the front roller lands between my belly button and bosom; I think your frame is too low, also. I am not sure how high the adjustable legs are on the newer frames, but I would think you can raise it several inches and it would be far more comfortable for you. Link to comment Share on other sites More sharing options...
yankiequilter Posted December 23, 2016 Report Share Posted December 23, 2016 When I took my beginner class from Dawn I believe she said a comfortable height is at the belly button. Not sure how high the standard table legs will go. You might consider the hydraulic lift since you can adjust the height to suit your current comfort level. Right now my table is at the lowest level it will go - 36" at the backing bar - and I am sitting on a stool and doing SID. When I free motion I raise it to waist high and will occasionally raise or lower a tiny bit to get a different angle for back/arm relief. To test I raised the table to 42" at the backing bar and stopped because I was not comfortable raising it any higher, not sure how much higher it would go. Link to comment Share on other sites More sharing options...
Sharon Deming Posted December 23, 2016 Report Share Posted December 23, 2016 I have my table set to a height suitable to sit down to do pantographs from the back. I use a saddle stool with adjustable height to get the right ergonomic relationship between me and the rollers. I can't stand for long at a time, so I use the stool. Love it. Link to comment Share on other sites More sharing options...
Neys1965 Posted December 24, 2016 Author Report Share Posted December 24, 2016 Glad to hear, the ergonomic stool is on my wish list....I can't stand for long either. Hubby helped me raise the legs tonight so it is perfect now! Link to comment Share on other sites More sharing options...
Neys1965 Posted December 24, 2016 Author Report Share Posted December 24, 2016 4 hours ago, yankiequilter said: When I took my beginner class from Dawn I believe she said a comfortable height is at the belly button. Not sure how high the standard table legs will go. You might consider the hydraulic lift since you can adjust the height to suit your current comfort level. Right now my table is at the lowest level it will go - 36" at the backing bar - and I am sitting on a stool and doing SID. When I free motion I raise it to waist high and will occasionally raise or lower a tiny bit to get a different angle for back/arm relief. To test I raised the table to 42" at the backing bar and stopped because I was not comfortable raising it any higher, not sure how much higher it would go. I'll put that lift on my wish list for the future. His mind is still reeling from the purchase price.... Link to comment Share on other sites More sharing options...
Neys1965 Posted December 24, 2016 Author Report Share Posted December 24, 2016 4 hours ago, LisaC said: My favorite height is when the front roller lands between my belly button and bosom; I think your frame is too low, also. I am not sure how high the adjustable legs are on the newer frames, but I would think you can raise it several inches and it would be far more comfortable for you. We finally read the directions and for the APQS Freddie we could adjust the legs 9". Much better! Link to comment Share on other sites More sharing options...
LisaC Posted December 24, 2016 Report Share Posted December 24, 2016 You can buy hydraulic lifts and make the system yourself for a lot less money. We purchased my Suspa lifts on eBay and they are identical to the system from APQS. My husband has purchased many hand cranks lifts for his woodworking tables which are very big and heavy; they lift very easily; and those would work on your APQS. PM me if you want some information on how to do it yourself. I raise and lower my frame many times in a single quilting session; I find it to be a very valuable tool. I also use the saddle stool and sitting for fine, detailed work! Then it is lowered almost to the bottom. Link to comment Share on other sites More sharing options...
Quilting Heidi Posted January 2, 2017 Report Share Posted January 2, 2017 I adjusted and adjust height when I first got my machine. I finally got a hydraulic lift and now I can adjust whenever I need to. I find that even an inch change can make a difference. If I'm sitting I have it lower if I'm standing I have it higher. If I'm doing micro work I have it different then if I'm doing a panto. Link to comment Share on other sites More sharing options...
jimerickson Posted January 3, 2017 Report Share Posted January 3, 2017 My experience is pretty similar to Heidi's. The proper height depends on what I'm doing, and whether I'm standing or sitting. Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.