Jump to content

Edgerider wheels


Recommended Posts

Does anyone own edgerider wheels? I suppose it's me, but I certainly get some drag w/my millie. I have leveled, adjusted carriage bolts, cleaned, oiled and filled all the squares, but I still feel as tho I am fighting with the machine. I did use an A-1 once and wish my Millie would move a little more freely than it does. Jamie Wallen told me to wax the rails w/Reinansence wax, which I do about twice a month. Helps for a short time. I've also tried quilting with a tight sandwich and a loose one but don't feel any difference. Any suggestions?

Link to comment
Share on other sites

Have you tried readjusting the cams on the carriage? My machine was dragging a bit and I went through the manuals adjusting cam section again and I solved my problem. Mine (all 4) were set up the same when we installed the machine (oops)...I later figured out the 2 sets are different. Made a world of difference for me. I do not have edgerider wheels...I have the ones my Millennium came with. Hope this helps.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...