Corey93 Posted July 18, 2017 Report Share Posted July 18, 2017 1996 12 foot table 2 Lights spools of thread, bobbers roller cart Velcro Straps Instruction Manual This was my grandmothers, she used to use it when she was younger but she stopped using it. It is still fully functioning, its been under a sheet in her basement for all these years. I have done some research but as I am not a quilter, I have taken pictures of everything that comes with it for sale. Any questions please feel free to ask. I have more pictures if needed. Best Offer Link to comment Share on other sites More sharing options...
zeke Posted July 18, 2017 Report Share Posted July 18, 2017 Hey Corey. You might want to start with an asking price first and go from there. Looks like my old workhorse from way back when. It's still running strong and about the same age. I seen them for sale from $1100 all the way up to $4000 depending on what it come with. Good luck. Zeke. You might want to invest in a laser for the sale as well. Makes it more desirable for those whom like them. I made mine and Hotwired it to the machine. They come battery operated and hard wired. Link to comment Share on other sites More sharing options...
dbustle Posted July 18, 2017 Report Share Posted July 18, 2017 Do you have the roller bars that go on the table/frame? Link to comment Share on other sites More sharing options...
Corey93 Posted July 18, 2017 Author Report Share Posted July 18, 2017 I only have the roller for the machine itself Link to comment Share on other sites More sharing options...
RunningThreads Posted July 19, 2017 Report Share Posted July 19, 2017 There should have been 3 or 4 round bars about 2 inches in diameter about the same length as the table. Three of them should have canvas rolled onto them Link to comment Share on other sites More sharing options...
Corey93 Posted July 19, 2017 Author Report Share Posted July 19, 2017 I will look for them Link to comment Share on other sites More sharing options...
Sheri Butler Posted July 19, 2017 Report Share Posted July 19, 2017 I sell the 1/2" foot to go with this machine, so the new user can use rulers to make his/her designs with. Let the new owner know, as it will enable their quilting to expand to more designs! It replaces the old spoon foot you have on it. Link to comment Share on other sites More sharing options...
Creative quilter Posted July 24, 2017 Report Share Posted July 24, 2017 We're you able to locate the 3 or 4_quilting bars for this? If you have, I'd be interested in this. Msg me & we can speak further concerning this machine. Thanks Link to comment Share on other sites More sharing options...
Bunny57 Posted August 11, 2017 Report Share Posted August 11, 2017 where are located> Bunny Link to comment Share on other sites More sharing options...
iquiltit Posted August 13, 2017 Report Share Posted August 13, 2017 where are u located? Carol Link to comment Share on other sites More sharing options...
iquiltit Posted August 14, 2017 Report Share Posted August 14, 2017 I will give you $ 1500 if you are close enough to to WV Link to comment Share on other sites More sharing options...
iquiltit Posted August 14, 2017 Report Share Posted August 14, 2017 You arfe close enough for me will you take $ 1500 Carol Link to comment Share on other sites More sharing options...
iquiltit Posted August 14, 2017 Report Share Posted August 14, 2017 I will buy the machine if you can find the other roller bars there are only 2 more on that machine. I called APQS about the bars and they are no longer available. Thanks Carol Link to comment Share on other sites More sharing options...
Corey93 Posted August 14, 2017 Author Report Share Posted August 14, 2017 I have not been able to find the bars, so the machine is as is. Link to comment Share on other sites More sharing options...
iquiltit Posted August 14, 2017 Report Share Posted August 14, 2017 they wouldn't be tied up under the table would they ? Just saying lol Link to comment Share on other sites More sharing options...
iquiltit Posted August 14, 2017 Report Share Posted August 14, 2017 I'll offer you $1000. Since it as is Link to comment Share on other sites More sharing options...
Corey93 Posted August 14, 2017 Author Report Share Posted August 14, 2017 I am sorry, but I feel that is low. Link to comment Share on other sites More sharing options...
iquiltit Posted August 14, 2017 Report Share Posted August 14, 2017 ok Link to comment Share on other sites More sharing options...
zeke Posted August 15, 2017 Report Share Posted August 15, 2017 Cory. The take up rollers are an inch and a half in diameter. The 2"ers didn't come into play for a few more years later with the Millennium. Anyways, the person buying your machine may have to spend a couple to a few hundred bucks for the take up. Then they would have to spend about 50 bucks on canvas for the take up leaders. Also, be careful that your machine doesn't fall off the table. The inside take up prevents that from happening. I sold mine about 8 years ago for $3000, but that was with the take ups as well. It's your choice and now your machine, but how you going to demonstrate how it quilts without take ups. I would suggest that you find yourself a machine shop that could help you out with the take ups. Zeke Link to comment Share on other sites More sharing options...
iquiltit Posted October 23, 2017 Report Share Posted October 23, 2017 bump did u sell this Link to comment Share on other sites More sharing options...
Corey93 Posted October 23, 2017 Author Report Share Posted October 23, 2017 It is not sold Link to comment Share on other sites More sharing options...
iquiltit Posted November 9, 2017 Report Share Posted November 9, 2017 yes I will take the machine. Can I pick it up this coming Monday? the 13th Where in PA do you live. Thanks Carol Link to comment Share on other sites More sharing options...
Corey93 Posted November 9, 2017 Author Report Share Posted November 9, 2017 Can you get it Wednesday morning, Monday and Tuesday I can not get out of work. Any idea what time it would be? I live in Boothwyn PA 19061, I will send direct address via private message thanks, steven Link to comment Share on other sites More sharing options...
iquiltit Posted November 10, 2017 Report Share Posted November 10, 2017 ok also send me your phone # too it will take us 6 hours one way but it almost a straight shot we have discussed we might drive half way close to you, spend the night then see you before noon wed. roxie13052@yahoo.com Link to comment Share on other sites More sharing options...
Corey93 Posted December 11, 2017 Author Report Share Posted December 11, 2017 *bump* This machine is still for sale, original buyer has not responded back in a good bit. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.