Kelli 0 Report post Posted March 21, 2018 I am the proud owner of a lovingly used Lenni. I have had this happen a few times in the only quilt I have done. I am cruising along and all of the sudden it won't move and the stitch regulater seems to be stuck on high speed. I have to stop it and restart and it goes great again. Has anyone had this happen? Am I doing something wrong? Share this post Link to post Share on other sites
sewingpup 223 Report post Posted March 21, 2018 Hi, I think I would clean the rails and the all the wheels first.........and if it still does it......I would call the APQS. I haven't had this happen.......Lin Share this post Link to post Share on other sites
RunningThreads 234 Report post Posted March 21, 2018 Are you computerized? The reason I ask is you said the machine won’t move and the regulator seems stuck in high. It shouldn’t be stitching if you are not moving. By chance are you in manual? Don’t be afraid to call APQS for help, they have no problem providing support no matter how old the machine is. As for the machine getting stuck when it happens look to see if you can see why before moving it away from that spot, something blocking a wheel, a power cord snagged, if you have the old table with the vertical wheels is there a dent in the rail? Hope this helps you eliminate a few things. Nigel Brenda Wells - Green Millie. Sold November 2017 Nigel Wells - Ultimate 1 with Intellistitch & IQ. Sold January 2019 Share this post Link to post Share on other sites
Kelli 0 Report post Posted March 21, 2018 Thanks ladies. I am not computerized and the stitch regulator is on. I will be moving when it starts but it stops moving and it makes a nasty knot that I have to rip. I will call APQS. Share this post Link to post Share on other sites