Ultimate Newbie Posted March 21, 2018 Report Share Posted March 21, 2018 Hello there. Just bought and set up a used Ultimate xx, and the button controls on the ergo handles are not talking to the machine. Any suggestions? thanks! —Joan Link to comment Share on other sites More sharing options...
RunningThreads Posted March 21, 2018 Report Share Posted March 21, 2018 Is the speed dial turned up. If I remember correctly the speed can be turned to zero. Nigel Link to comment Share on other sites More sharing options...
Ultimate Newbie Posted March 22, 2018 Author Report Share Posted March 22, 2018 You are correct - dial needs to be turned up. It was turned to zero for transport, but then turned up. Tried that, still nada. Link to comment Share on other sites More sharing options...
RunningThreads Posted March 22, 2018 Report Share Posted March 22, 2018 And to state the obvious it is plugged in and the fuse is good? Did you remove the handles for transport? If so recheck the connections. I think that is all I have. Nigel Link to comment Share on other sites More sharing options...
Ultimate Newbie Posted March 22, 2018 Author Report Share Posted March 22, 2018 Problem solved! Thanks to generous advice from the previous owner. The handles got out of sync, I had to unthread the needle, turn the machine on, hit the back power button, walk around to the front and hit that power button and ..... voila! Thanks for the tips and advice, —Joan Link to comment Share on other sites More sharing options...
RunningThreads Posted March 22, 2018 Report Share Posted March 22, 2018 Thanks for posting your solution. It will probably help someone in the future. Nigel Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.