cnosburn 1 Report post Posted April 11, 2018 When trying to do free hand quilting, machine is hard to move. Share this post Link to post Share on other sites
Quilting Biker 3 Report post Posted April 13, 2018 Double ck you don't have any threads tangled up around any of the wheels. May just need to also wax the edge that the wheels run on. Share this post Link to post Share on other sites
Kueser 46 Report post Posted April 15, 2018 I'm not sure about waxing. Maybe need to do a deep clean on the wheels. Grab a bottle of alcohol and some scrap batting and clean the groves of the wheels and the edges of the carriage. Check the cords to see if they aren't hanging up on something under the table. Cee K Share this post Link to post Share on other sites
cnosburn 1 Report post Posted April 15, 2018 Thanks for your inputs. I did check and cleaned the wheels, but not with alcohol, but will do this. I have been in contact with Dawn at APQS and apparently I will need to adjust the cams on the front of the carriage which I have done, but it made it worse because evidently I did not get them tightened to match. So am waiting on an response from APQS again. They have to be perfectly matched to work properly. Share this post Link to post Share on other sites
