lakekids Posted August 19, 2018 Report Share Posted August 19, 2018 My bobbin winder is very difficult to activate. I have to push so hard on the switch that I sometimes move the winder and frequently lose hold of the thread tail. Any suggestions? Link to comment Share on other sites More sharing options...
RunningThreads Posted August 19, 2018 Report Share Posted August 19, 2018 I don’t have mine anymore to take a picture but this is how I worked it. I used to put my right index finger on the left side of the switch assembly and my right thumb on the right side and rotate my wrist counter clockwise. Basically rotate the switch like a doorknob. Hope this helps. Nigel Link to comment Share on other sites More sharing options...
srichardson Posted August 20, 2018 Report Share Posted August 20, 2018 I have mine plugged into a power strip. I push the switch on the bobbin winder into the on position, hang onto the thread and then turn the power strip on. It works like a charm. I struggled with using the winder before I thought of the power strip. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.