Pat Bell Posted February 16, 2019 Report Share Posted February 16, 2019 I was taking some tacking stitches when the machine made a noise like it does at a thick seam. The needle went down but it won’t come up. Turned machine off and on... nothing, tried turning the fly wheel manually but it won’t budge. I was able to get the bobbin case out no problem. I can see the tip of the needle in the bobbin area. The machine doesn’t make any noise when I turn it on now. Can anyone help? I have a 2016 Lenni. Thanks so much! pat Link to comment Share on other sites More sharing options...
RunningThreads Posted February 16, 2019 Report Share Posted February 16, 2019 You need to get the needle out. Try turning the flywheel backwards and maybe loosening the needle screw and rotating backwards. Once you get the needle out you will probably have to change the fuse. It is in a little drawer where the cord enters the machine unless it was built for Canada. The Canadian machines have a separate fuse for the motor. Let us know how you make out. Nigel Link to comment Share on other sites More sharing options...
chatty94 Posted December 20, 2019 Report Share Posted December 20, 2019 Sounds like I have the same problem.....probably blown fuse on 2008 Lenni. The needle was stuck down, but I was finally able to get it loose and the flywheel moves now. My problem is I can’t get the door open to check/change the fuse. Any suggestions? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now