Neys1965 Posted March 2, 2019 Report Share Posted March 2, 2019 I’m trying to do fill-in 1/4” straight lines using a ruler with a ruler base in stitch regulated mode. Retracing design to get to spot to begin straight line is a fight with my machine. Stitches are unpredictable and I’m not able to retrace my previous stitch line. I have no problem doing bump back feathers or retracing anything else. I tried taking off stitch regulated mode and the stitches are smaller and tighter. Help? Using glide bobbin, so fine top and have a Freddie. Link to comment Share on other sites More sharing options...
Gail O Posted March 3, 2019 Report Share Posted March 3, 2019 Do you have the true 1/4" hopping foot? If it's the old style, they are not a true 1/4" all the way around. Make sure that you are holding the ruler gently - as a guide. If you are pressing down on the fabric or against the hopping foot too hard, it will pull at the fabric and skew your lines. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.