redhotmama Posted January 25, 2020 Report Share Posted January 25, 2020 The laser light on the panto side flickers and is very easily turned off. I gently tap and rotate the cable to get it to come back on. Usually stays on while running the machine, but now I'm having trouble with that. Has the light failed and I should replace it? Thanks in advance, Link to comment Share on other sites More sharing options...
jimerickson Posted January 30, 2020 Report Share Posted January 30, 2020 Red: Check your connections and make sure they're clean and bright. You might not be getting a good connection when you plug it in. Good luck. Jim Link to comment Share on other sites More sharing options...
redhotmama Posted February 14, 2020 Author Report Share Posted February 14, 2020 Thank you Jim. Clean with alcohol, I assume? I had edited that post but it didn't complete. Can you also tell me how to fix my thread sensor adjustment. It has started beeping allot and I've tried various amounts of wrapping around the wheel. That, coupled with the intermittent beep that I've never actually figured out - it is all annoying. Link to comment Share on other sites More sharing options...
Cagey Posted February 15, 2020 Report Share Posted February 15, 2020 For electrical connections, I would recommend this spray https://www.walmart.com/ip/CRC-5103-Quick-Dry-Electronic-Cleaner-11-Wt-Oz/16817418 Hold the connection in a rag or paper towel to ensure the spray does not drip on the floor or other areas. Wear safety goggles to ensure you do not get any in your eyes. It will not hurt your hands, though it may dry the skin slightly. Hopefully this will fix your issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now