zandersgranny3 Posted February 11, 2020 Report Share Posted February 11, 2020 Having a problem with pantos on a Millie. Light is straight on back but the pantograph is crooked. Starts out fine but pattern start going up on quilt. Not straight on the quilt. Help Link to comment Share on other sites More sharing options...
jimerickson Posted February 12, 2020 Report Share Posted February 12, 2020 Do you have the panto laid out on the table straight? Is your lazer clamped tight? I'd check the layout by putting a pin in the top most position for the panto on each end of the quilt. Then I'd check to see if the lazer matches both points when you move the machine. If it does your line up is OK. If not, adjust the pattern so the points match your quilt marks. It's possible that your rollers are slipping and the quilt is moving as you quilt. Check that out as well. Good luck. Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now