Recommended Posts

I use a Lenni. Sometimes my quilt on the take-up roller will be tight on the side with the brake and somewhat looser on the other side so that my pantograph pattern will be off on that side 1/4 to 1/2 inch. Do I need another brake on the opposite side or just continue to tighten the one brake. Or, am I missing something I should be doing?

Share this post


Link to post
Share on other sites

You have several things to look at---it doesn't have anything to do with the brake. First, make sure the backers you load are perfectly on-grain. This can be done with tearing the fabric instead of rotary cutting. If it's always on one side, your rollers may not be perfectly parallel or level. Just a small bit high on the right side will cause that side to roll tighter, which magnifies with every advance. Use a long level to check for horizontal level. Then adjust the bolts that attach the roller to the frame until the roller is level. Unfurl your leaders when you check for level so you are on bare metal and not the canvas. The front roller can also be off as far as distance between the take-up rollers. If the right side is farther out, it will roll tight on the right side. The solution is looking at the bolts that fasten it to the frame. You need to count the bolt-threads on each bolt, left and right. If the numbers are off---make them match. You can also count the bolt-threads on the back roller attachments if you don't have a long level. Finally, your leaders may be un-square/off. There are lots of tutorials that show how to fix warped or saggy leaders. Usually having (or making) a straight edge, then pinning the leaders together works well. Pin them, spritz them with plain water, tighten them, and let them dry. Hoping this is helpful!


Linda Rech

Finely Finished Quilts

Millennium on Bliss rails--hand-guided

http://www.topperquilttools.com

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...