Jump to content

Recommended Posts

I'm having tension issues on Millie which is very unusual. I've gone through a bunch of troubleshooting steps.

I noticed that the check spring amount of stiffness is really light. it is just very soft. Is this normal or is the spring finished?

Thanks 

Doug

Link to post
Share on other sites

It sounds like the spring tension might be the issue.  You can tighten the spring tension by removing the tension assembly, loosening the set screw, rotating it against the spring, tightening up the set screw and replacing it in the machine.  When you return the assembly to the machine, make sure that the spring is set at the 10:30/11:00 position when it is "resting".  Good luck.  Jim

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...