Berny Posted June 28, 2008 Report Share Posted June 28, 2008 I\'m using a stick star pattern that I\'ve used before and on every star one side has a wobble in it. It\'s not always on the same spot or the same side but they seem to be on the more vertical line as opposed to the more horizontal line. Is it the CQ or what? Any suggestions. Thanks, Berny Link to comment Share on other sites More sharing options...
smorris Posted June 28, 2008 Report Share Posted June 28, 2008 Hi Berny Check the Y axis cable to see if it is tight enough and also check that the tension block that holds the Y axis wire is not slipping along the wire. Sue in Australia Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.