mollierock Posted August 19, 2006 Report Share Posted August 19, 2006 My thread tensioner came out of my millie. I am trying to put it back in and my call to apqs was not returned yesterday. My problem is the tiny screw that holds the tensioner in. Does anyone know what kind of screw driver or hex is needed to losen this up. I can get the tensioner back in. Any help greatly appreciated. My problem is my eyesight and short arms to have trouble seeing it good. Thanks for your help Link to comment Share on other sites More sharing options...
mark Posted August 19, 2006 Report Share Posted August 19, 2006 Hi Mollie, The little set screw that comes in from the side is an allen screw. The size of wrench that you need is 5/64th. That should get you to loosen up the screw so you can reinsert the tension and then retighten the screw to hold it in place. I know it is the weekend, but I hope this gets you going. If not, please phone again Monday morning and they can get you going. Take care, Link to comment Share on other sites More sharing options...
mollierock Posted August 19, 2006 Author Report Share Posted August 19, 2006 Thanks Mark. That's what I need to know. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.