polishembroidery Posted June 3, 2018 Report Share Posted June 3, 2018 I loaded a pattern to quilt path sewn 4 rows advance to the fifth one and stitches start to skip the machine is moving but the stitch is not forming checked all the cables, restarted the machine and quilt path and same is happening any suggestions how to fix the problem Link to comment Share on other sites More sharing options...
RunningThreads Posted June 3, 2018 Report Share Posted June 3, 2018 Are there needle holes where the stitch is supposed to be if so it is not a Quilt Path problem but if fact skipped stitches. Usually a timing issue and happens when the head moves toward the left and up. First thing would be a new needle as yours may be slightly bent, also set the eye of the new needle at the 6:35 position rather than straight ahead and this sometimes will compensate enough that you don’t have to retime. Stretchy fabrics can also cause this issue and that is why there a special needles with a ball point. If there are no holes where the missing stitches are and you are in stitch regulated mode that tends to be an encoder needing adjustment or malfunctioning. Nigel Link to comment Share on other sites More sharing options...
polishembroidery Posted June 3, 2018 Author Report Share Posted June 3, 2018 No holes in long stitches it seam like it want to make one but machine is pulling Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.