pamjcole Posted December 19, 2005 Report Share Posted December 19, 2005 After 2 days, brand new Millennium take up motor stopped functioning. Circuit is fine, replaced fuse, motor still won't turn, either from foot or motor mount switch. This makes the machine unusable! Help! Link to comment Share on other sites More sharing options...
connie hurst Posted December 19, 2005 Report Share Posted December 19, 2005 Hi Pam, You can still use the machine, as you can loosen the brake (wooden block) and roll the fabric by hand..... That will at least get you by, until we can send you a replacement... For some reason there must be a loose wire... we will ship a new on on Tues... Hope all else goes good, sorry about the inconvenience!!!!! Link to comment Share on other sites More sharing options...
John Mitchell Posted December 20, 2005 Report Share Posted December 20, 2005 Pam: You have probably checked this but it won't hurt to check. The left toggle switch on the control box is marked Forward and Reverse but the middle position is off. Maybe you had some help from a little one and the switch is in the middle (unmarked position). To function it has to be in forward or reverse. This is how we keep our little grandaughter from operating the motor drive. John Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.