mgregory Posted May 31, 2004 Report Share Posted May 31, 2004 I broke a needle. I must have bent something. When I put a new needle in it is hitting something and will not go all the way down. I had such big plans for sewing all week end. Must have been in to big a hurry. Link to comment Share on other sites More sharing options...
mark Posted June 2, 2004 Report Share Posted June 2, 2004 It sounds like you may have knocked your machine out of time. You can refer to your manual on the timing or give us a call at the factory and we can walk you through the timing procedure. Good luck. Mark APQS Link to comment Share on other sites More sharing options...
countrylanequilting Posted June 4, 2004 Report Share Posted June 4, 2004 Mike gave you good advice. You may have caused this problem by not fully inserting the needle fully into the needle bar until it bottoms out. Don't for:):)get to correctly insert the needle. If you need help you are welcome to contact me. During the week Mark, Connie or Mike can help you at APQS. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.