simplydivine Posted February 17, 2006 Report Share Posted February 17, 2006 I love my hartly fence, but the "arm" that comes from under the sewing maching keeps loosening. I have to stick my hand under there and re-tighten the 2 screws often! Like every other circle! I think it happens because I have to lift up the arm a bit in order to put the pin into one of the holes. After awhile, there is "play" in the arm. Is anyone else having this problem? Is there a solution other than re-tightening so often? curious, Julie Link to comment Share on other sites More sharing options...
Myrna Ficken Posted February 17, 2006 Report Share Posted February 17, 2006 I have had this happen before. I had to get under the table, move one of the clear table pieces, and really tighten the screws as tight as I could get them. If it comes loose again I am going to put a tiny bit of lock tight on them. Myrna Link to comment Share on other sites More sharing options...
huwillquilt Posted November 3, 2006 Report Share Posted November 3, 2006 Hi Julie when using lock tite on the screws make sure you use the blue or removable kind or you may not get it loose afterwards period.:cool: Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.