nora123 Posted June 11, 2009 Report Share Posted June 11, 2009 Ok ladies I need to pick your brains. The last two times I have set my stitch lenght at 10 and been quilting along and all of a sudden it has changed back to 8 all by itself. I did not touch anything. Can someone tell me why this is happening?. Any help would be great. Nora Millennium Washougal WA Link to comment Share on other sites More sharing options...
Bekah Posted June 11, 2009 Report Share Posted June 11, 2009 Nora wish I could help, mine changes the other way I will be stitching along in a nice ten and then it gets so tiny you can't even see it any more. and those stitches are not fun to frog Link to comment Share on other sites More sharing options...
LindaB Posted June 12, 2009 Report Share Posted June 12, 2009 Hi Nora & Bekah..... Here is something you might not be aware of, sometimes we put too much pressure/weight on our front handles and what that does is slightly lift the backend just enough to slightly disengage the encoder - and thus your stitches will get longer. I almost went nuts years ago until Mark explained that to me. So keep a real real light hold of your handles.....hope this helps solve your problem. Link to comment Share on other sites More sharing options...
nora123 Posted June 12, 2009 Author Report Share Posted June 12, 2009 this happens when I am in the panto side. Nora Link to comment Share on other sites More sharing options...
meg_marsh Posted June 12, 2009 Report Share Posted June 12, 2009 Ck with APQS - might be the circuit boards - had to switch mine out because I was having a similar problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.