Bevontheisland Posted May 31, 2015 Report Share Posted May 31, 2015 Hi. I was quilting along happily and my milli just blew a fuse. I had another so I put that in and after about 10 minutes that one blew too! The only thing I've done differently today was I cleaned the bobbin area and re oiled it. Any ideas. I'm out of fuses and can't get any more today but thought I'd try to figure out what the base problem might be. The only other thing I was doing today was learning how to use the Manuel mode. Thanks for any help. Bev. Link to comment Share on other sites More sharing options...
RitaR Posted June 1, 2015 Report Share Posted June 1, 2015 I wish I could help you, but it sounds like you need a fuse to figure things out. Is the stitch nicely balanced? Maybe a small bit of thread or fabric is stuck in there and not easily visible. Another idea, is any thread caught in the flywheel? Link to comment Share on other sites More sharing options...
Neher-in-law5 Posted June 1, 2015 Report Share Posted June 1, 2015 Give the APQS office a call, when my George blew fuses it was a short in the boards. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.