LindaFritchen Posted April 24, 2007 Report Share Posted April 24, 2007 We are installing the HF and are missing some little pieces: * 2 1/4-20 cap screws 1" long go down through the idles arm (think we can get these locally) * the 2 nylon bushings that go between the idler arm and the right front bracket of the machine...Guess we need to know the thickness of these or if we can substitute something else. Any advice is much appreciated. Anxious to try those BFs! Link to comment Share on other sites More sharing options...
DawnCavanaugh Posted April 24, 2007 Report Share Posted April 24, 2007 Hi Linda, Sorry you are missing a few Hartley parts! You can substitute a regular nut for the nylon bushings. The bushings are 1/4-inch thick. Just find a nut that is close to that thickness (make sure the thread hole is larger than the bolt you are using to attach the arm) and slip it over the bolt before attaching the arm. Contact Hartley Manufacturing and I'm sure Marilyn and Hartley would send you the "official" parts. Happy Quilting! Dawn Link to comment Share on other sites More sharing options...
Myrna Ficken Posted April 25, 2007 Report Share Posted April 25, 2007 Linda. Hope you got the parts you needed. Let us know how your fans go. They are so much fun. Myrna Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.