Circle Square Posted April 9, 2005 Report Share Posted April 9, 2005 Can anyone offer advice or pointers for attaching the Hartley Fence by myself? It seems I need at least 3 hands! Link to comment Share on other sites More sharing options...
ckirk Posted April 11, 2005 Report Share Posted April 11, 2005 Do you have the instruction sheets? I attached mine by myself, and as I recall I adjusted the back wheels one at a time to get the proper fit. If you need instructions, you can find them at www.aquilterschoice.com/sitemap.htm. Look under Hartley accesories and you should see a link for a .pdf file for Hartley Fence instructions. This is where I got my instructions as I bought my fence used and there were no instructions with it. Good luck! Cathy in NC Link to comment Share on other sites More sharing options...
sue in Australia Posted April 11, 2005 Report Share Posted April 11, 2005 When I have taken my HF off and there is no-one here to help, I stand at the back of the machine table and put the back wheels on and then push my body against the back of the fence and lean over and slide the bolts on the front of the HF towards the front edge of the table and do them finger tight. Then I go around the front and tighten them properly. Sue I don't normally take it off though as I haven't come across a quilt so large I needed to. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.