Conniejo Posted February 4, 2009 Report Share Posted February 4, 2009 I just got my green machine and I'm really green. How do I load my laser light on to the back of my machine to do a panto. It was loaded on the top and can't find any instructions. Thanks Link to comment Share on other sites More sharing options...
Katydids Posted February 4, 2009 Report Share Posted February 4, 2009 Congratulations on your new machine!! Unscrew the black screw just enough to loosen the laser light. Then push in on the screw and it opens up the area that slips down onto the post. Take it off. Then just the reverse the above directions to mount it on the laser post on the back side of the machine. You should have a cord coming from the pack at the back of the machine which is the laser pack. Unplug the extension wire that was probably on the laser mounted at the front and plug in the cord coming from the pack. The extra extension cord is for using the laser at the front mount. Hope this makes sense. Link to comment Share on other sites More sharing options...
Conniejo Posted February 4, 2009 Author Report Share Posted February 4, 2009 The problem is I can't find a post at the back to attatched it to. Is there anyway I can get a picture of it. I've looked at the website of the different machines but haven't found one. Thanks for trying to help me out. Conniejo Link to comment Share on other sites More sharing options...
Katydids Posted February 4, 2009 Report Share Posted February 4, 2009 There should have been a long threaded rod in the envelope that the handlebars came in. That screws into the large hole on the side of the machine. Left side when standing on the panto side. Here is a photo. Link to comment Share on other sites More sharing options...
Conniejo Posted February 4, 2009 Author Report Share Posted February 4, 2009 So that's what that was for. Thought it had to be for something. Just didn't know what. What a green horn am I. Thanks for your help. Don't have time to try it out now, but will first thing in the morning. Thank Bunches Conniejo Link to comment Share on other sites More sharing options...
DawnCavanaugh Posted February 5, 2009 Report Share Posted February 5, 2009 Connie Jo, Check for a disk inside your assembly folder. It has the manual on it so that you can view it on your computer or print out any sections you need. The manual has several sections that will help a "green girl" including loading a quilt and practice exercises to help you get to know your buttons and machine features (including figuring out what those "extra" pieces are for:)) If you can't locate it, just let us know and we'll get you another. Have Fun! Link to comment Share on other sites More sharing options...
Conniejo Posted February 5, 2009 Author Report Share Posted February 5, 2009 Yes I did check the manual disk first, but couldn't find any information on the laser light. But I could have missed it. There is a lot of useful information in there. Thanks for all your help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.