lrooth Posted February 8, 2009 Report Share Posted February 8, 2009 I am in the process of changing my back right channel lock wheel. I have removed the axle from the back of the machine, removed the wheel assembly from the channel lock, but now I cant get the wheel off of the toothed gear to change it. Can the gear be removed or do I need to re-order a wheel with the gear already attached? Thanks for any input. LRC Link to comment Share on other sites More sharing options...
witha'K'quilting Posted February 8, 2009 Report Share Posted February 8, 2009 On my Millie there are 2 screws on the bottom of the gear holding it onto the wheel. Just unscrew it and the gear comes off. I had to do this when I replaced my wheels with edgeriders. Link to comment Share on other sites More sharing options...
lrooth Posted February 14, 2009 Author Report Share Posted February 14, 2009 had to use a really small allen wrench and that did it. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.