Sylvia Posted October 24, 2009 Report Share Posted October 24, 2009 Sorry about that. I know this has been covered but I haven't found it yet today. What do I do to make the needle up/down button stop running? This has only started to happen in the last couple of days and slows me down considerably. So...when I go to start quilting, I push the yellow button to get the needle down to pick up the bobbin thread. Usually it goes down, then up and off I go. Now it keeps going and going, making thread knots as it runs. What shall I do? Thanks for any help. Sylvia FC Link to comment Share on other sites More sharing options...
jmcclannan Posted October 24, 2009 Report Share Posted October 24, 2009 If you have a Millie just look on pages 221-222 in your manual. It is a simple adjustment to the gold screw. Don't be scared of it. You will probably have to do this from time to time. Link to comment Share on other sites More sharing options...
Sylvia Posted October 24, 2009 Author Report Share Posted October 24, 2009 Thanks for the help. I will get the manual out and follow the instructions there. Happy quilting to you all. Sylvia Link to comment Share on other sites More sharing options...
griff Posted April 23, 2010 Report Share Posted April 23, 2010 I have the opposite problem. My needle up/down button isn't working at all. The other buttons on that handle work fine. It had been working ok for several quilting passes and then stopped. I turned off the machine and tried again the next day. It worked twice and hasn't worked since. What do I do? Can I turn the fly wheel manually? Also, I do not have the instructions for screw #8 adjustments. Do I need to adjust this? Thanks for any help you can give me. Link to comment Share on other sites More sharing options...
meg Posted April 23, 2010 Report Share Posted April 23, 2010 im afraid i dont know how to fix your problem, but you can turn the flywheel manually. i do it all the time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.