grammy9 Posted December 16, 2009 Report Posted December 16, 2009 Please help!! My top thread is too loose on top of quilt! The bobbin thread is not showing on top, just the top thread is too loose! What do I need to do? Trying to get a quilt finished before tonight! My machine was stitching perfectly, then I had to wind bobbins and when I re- threaded it went to POT! Had to frog 2 complete rows, and now I cannot get it adjusted! What could it be!!
Primitive1 Posted December 16, 2009 Report Posted December 16, 2009 First thing I would do is rethread it again and double check to be sure thread is in the right path.. and then clean the bobbin again....
grammy9 Posted December 16, 2009 Author Report Posted December 16, 2009 Thanks, Vicki! I will try that! Seems like I have tried everything else!
Quilting Heidi Posted December 17, 2009 Report Posted December 17, 2009 Hope you got the problem fixed by now but I would have suggested exactly what Vicki did! Sounds like you don't have enough tension on the top so check to make sure you are locked into the tension disk and don't miss the little L bar thing after the tension disk...I can tell you from experience that that can really cause some tension issues.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.