Jenquilts Posted June 21, 2012 Report Share Posted June 21, 2012 Hi, I am starting a new customer quilt with dark teal thread. My machine was stitching perfectly. When I go from front to back the top stitches are not straight they kind of zig zag...like one will be to the right and the next is to the left. Another way to describe it is they look wavy instead of straight. Any ideas what to adjust. I changed the top tension around but it doesn't seem to get better. I have the bobbin set at my normal spot and they stitches look fine side to side, just not front to back...back to front doesn't look awesome but its not quite as bad. Any advice? Thanks, Jen Link to comment Share on other sites More sharing options...
DawnCavanaugh Posted June 21, 2012 Report Share Posted June 21, 2012 Jen, Take a look at the answers to a similar question posted a few days ago...it may have a solution that will help! http://apqs.com/quiltboard/viewthread.php?tid=33818 Link to comment Share on other sites More sharing options...
Jenquilts Posted June 21, 2012 Author Report Share Posted June 21, 2012 Thanks Dawn, I looked it over and will try all of those fixes:) Link to comment Share on other sites More sharing options...
Jenquilts Posted June 22, 2012 Author Report Share Posted June 22, 2012 It's the thread....don't know yet if its the dark color but I switched to orange which I had just used and its stitching fine...going to try to set it up the thread path differently to see if I can fix it...any advice beyond what Dawn mentioned already? Thanks, Jen Link to comment Share on other sites More sharing options...
Jenquilts Posted June 22, 2012 Author Report Share Posted June 22, 2012 I tried changing the thread path...it got better but it didn't completely solve the problem. Do you have any other advice? I'm not sure of the science behind what I'm trying to do so I'm not sure what to try next. Link to comment Share on other sites More sharing options...
Jenquilts Posted June 22, 2012 Author Report Share Posted June 22, 2012 Here is a pic.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.