chrisee Posted October 22, 2012 Report Share Posted October 22, 2012 I have 2011 Millie with the works and CQ! It is attempting to stitch the pattern Espalier by Lorien, but needle goes down, tries to move to another place with the needle still down!! leaving a long thread - in the middle of the pattern.....nearly a ripped hole. Quality of pic poor, there is 'residue' from the cotton wadding on the material which I have attempted to remove with a microfibre cloth. Link to comment Share on other sites More sharing options...
meg_marsh Posted October 22, 2012 Report Share Posted October 22, 2012 I don't have CQ but do have Millie with IQ & Innova with AP. When this happened to me on my Innova, it was because the encoder had gotten off track. Cleaned and tightened up my encoder and all was fine again - a 30 sec fix. Good luck. Link to comment Share on other sites More sharing options...
Johnmach Posted October 22, 2012 Report Share Posted October 22, 2012 Chrisee - Shut down CQ and restart your computer. See if that corrects the problem (the indexer may have forgotten where it was). If not, call Butch or Stan at S & D Stitches. Johnmach 2006 Millie w/ CQ2 Link to comment Share on other sites More sharing options...
Joy Posted October 25, 2012 Report Share Posted October 25, 2012 Still having trouble Chrisee, thats not good. Have you got it working long enough to finish any quilts yet? Drop it claim it on insurance LOL Link to comment Share on other sites More sharing options...
Joy Posted October 25, 2012 Report Share Posted October 25, 2012 Did shutting it down Chrisee help it at all ? Poor thing nearly 1 1/2 years old and haven't been able to use it yet GGGGGRRRRRRRRR Drop it!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.