gardenslug Posted February 14, 2007 Report Share Posted February 14, 2007 Have had Milli for about 16 months. Was unable to use for some time as had two knee replacements and couldn't navigate stairs to use machine. Everything fixed (with me). However, milli stitch regulator gauge on the front only works intermittently. Back one seems to be fine. Also, occasionally have trouble with needle running up and down and not wanting to stop. Any suggestions? (And my DH is my repairman. - and that is a good thing). Marilyn Link to comment Share on other sites More sharing options...
Guest mark Posted February 14, 2007 Report Share Posted February 14, 2007 Hi Marilyn, Sometimes when the guage is acting funny, just shut down the machine and wait about a minute then turn the machine back on and see if the meter resets ok. If you still have problems with it, you can take the two screws out on each side that holds that front cover on. Behind the cover you will see a plug in that is for the meter, you might have to unplug and then plug it back in to make sure it is making a good connection. If you still have problems, please call us and we will take care of it. Take care, Link to comment Share on other sites More sharing options...
gardenslug Posted February 16, 2007 Author Report Share Posted February 16, 2007 Mark, Will be quilting again this weekend. Will give this a try (or my DH will do this). thanks for prompt reply. Marilyn Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.