jelemm Posted October 20, 2013 Report Share Posted October 20, 2013 Hi All, My first time posting though a very avid reader. Trying to get a quilt done to take to my daughter this week and all the stitches are coming out tiny! It happens no matter what stitch length I have on or whether the regulator is on or off. I have cleaned everything I can think of! Help!! Thanks so much jane Link to comment Share on other sites More sharing options...
Busy Quilting Posted October 20, 2013 Report Share Posted October 20, 2013 Seems strange if this is happening with the stitch regulator off, as then you control the length of the stitches by how fast you move the machine. Is the machine caught on something? Is the thread caught on the bottom of the spool and cannot feed correctly? What type of machine do you have? Link to comment Share on other sites More sharing options...
jelemm Posted October 20, 2013 Author Report Share Posted October 20, 2013 HI i have Millie. I rethreaded it a bit ago. Its almost as if something is holding it. Link to comment Share on other sites More sharing options...
Busy Quilting Posted October 21, 2013 Report Share Posted October 21, 2013 check the three hole guide above the tension disc sounds like you have it wrapped around it wrong Link to comment Share on other sites More sharing options...
jelemm Posted October 21, 2013 Author Report Share Posted October 21, 2013 will check thanks Link to comment Share on other sites More sharing options...
shirleyl Posted October 21, 2013 Report Share Posted October 21, 2013 Make sure your channel locks are off, and check your wheels for free movement. Is their a thread underneath caught on you needle plate or screw. I've had that happen. Shirley Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.