JanieN Posted May 14, 2014 Report Share Posted May 14, 2014 I have a new Millie which was ordered with Bliss rails and Quilt Path. We have the table and sewing head all assembled. Moved to the quilt path box and the first thing it says is to disassemble all rails and sewing head. We added the quilt path bracket to the bottom of the sewing head during the initial setup. Do we really have to take it apart and can we add the drive belt and other components with the sewing head and rails in place? Thanks! Janie Link to comment Share on other sites More sharing options...
barbm Posted May 14, 2014 Report Share Posted May 14, 2014 Janie, You can add the motor brackets, belt, etc. without disassembling everything, but you'll have to bounce back and forth between the Millie setup instructions and the QP setup instructions. You can call me at (509) 671-1467 and I can walk you through it. Or you can email Dawn@apqs.com (mark it High Priority) and she can walk you through it even better. Link to comment Share on other sites More sharing options...
JanieN Posted May 14, 2014 Author Report Share Posted May 14, 2014 Thanks so much Barb! The hubster stayed after it and we are almost done. Down to the wiring harness! Whew. Thanks for your offer of help!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.