Kim Posted January 4, 2005 Report Share Posted January 4, 2005 I have a nolting 24 which doesn't have the horizontal and vertical locks. I heard that you do service and repairs on noltings also. Does this mean that you can do or have the means to do upgrades with the H V locks? If so do I have to send my machine in to have this done or is this something I can have my DH put on for me? Kim Cates Link to comment Share on other sites More sharing options...
connie hurst Posted January 4, 2005 Report Share Posted January 4, 2005 Hi Kim, Our channel locks are electronic and tie into our circuit boards. I'm sure your wiring is all different. I think your best bet would be to contact Nolting and see if they have something for you to try.. Thanks, sorry we can't help! Good Luck Connie Hurst APQS Service Mgr/Tech. Link to comment Share on other sites More sharing options...
sdrogers Posted January 4, 2005 Report Share Posted January 4, 2005 Hi Kim I used to have a Nolting, an older one on a wooden table. If you have something simalar you can purchase window locks that fit on the rails and lock down. I do not have a photo to show you what to get but I would suggest looking at your local hardware store for something that will work. You may also be able to use simple binding clamps. Hope this helps! Link to comment Share on other sites More sharing options...
Kim Posted January 5, 2005 Author Report Share Posted January 5, 2005 Connie, Sherry , Thank you I will check in to those I told my DH and he said no problem he can do it. I said "COOOL" Kim Cates Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.