Nanzov Posted May 2, 2007 Report Share Posted May 2, 2007 I can't find any instructions for using the hydraulic lift now that I have installed it--not an easy task with the instructions I was sent. Pushing the "up" button didn't do much--a little noise, no movement. Any ideas? Link to comment Share on other sites More sharing options...
Johnmach Posted May 2, 2007 Report Share Posted May 2, 2007 This is probably a stupid question to ask you, but, what happens if you push the "down" button? Could the button be wired backwards, or mounted upside down? On ours, you push the "up" button, there is some noise of the pump working, and the legs raise. When you push "down", the motor runs, and the legs retract. If your assembly instructions were like ours, I agree, they are almost worthless. Johnmach Link to comment Share on other sites More sharing options...
Nanzov Posted May 2, 2007 Author Report Share Posted May 2, 2007 Thank you! You were right, pushing the opposite button raised the table. I will install the switch correctly and all will be fine. Thanks for the reply. Link to comment Share on other sites More sharing options...
countrylanequilting Posted May 2, 2007 Report Share Posted May 2, 2007 We have installed several hydraulic lifts for our clients and agree that the instructions could use some improvements. We will work more on this with APQS and see if we can't come up with better instructions. If you need any more assistance PLEASE let us know. John is more than happy to "walk" you through any issues on the phone if needed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.