Sew Sew Posted September 23, 2021 Report Share Posted September 23, 2021 How to fix my George’s stop down needle position. When I stop stitching the needle does not consistently go in the down position it will stay in the up position. Does anyone know how to fix this issue? Any help would be appreciated. Quote Link to comment Share on other sites More sharing options...
Cagey Posted September 23, 2021 Report Share Posted September 23, 2021 Sew Sew, Be sure to warm up you machine before making the adjustment. You can remove the bobbin and the upper thread from the needle and just let the machine run at a good constant speed for 5 minutes or so. Here is a link to an APQS instructional post. Read down to the bottom (prior to the comments) as there are different instructions for machine prior to 2007 and 2008 and later. I hope this helps you. https://www.apqs.com/needle-updown-wont-stop/ Hopefully this will fix your problem. Cagey Quote Link to comment Share on other sites More sharing options...
scaseyquilts Posted October 3, 2021 Report Share Posted October 3, 2021 There is a button on the front of my George next to the speed adjustment dial that allows you to set the needle in either the "needle up" or "needle down" position... Have you been using that? Sharon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.