carmen Posted October 29, 2007 Report Share Posted October 29, 2007 The laser light is not working on my Liberty:( Have you run into this problem? Help Please, Thanks, Carmen Link to comment Share on other sites More sharing options...
Mary Beth Posted October 29, 2007 Report Share Posted October 29, 2007 I have not ran into this problem, but I will ask a question or two to try to help figure out the problem. Where do you have it attached? On the bottom post of the machine or the top post? If on the top post, do you have both cord plugged in securley? That may be a start.... Link to comment Share on other sites More sharing options...
carmen Posted October 29, 2007 Author Report Share Posted October 29, 2007 Thanks, Mary Beth. Is on the panto side, I have not used it in the front yet. Worked fine on Friday. It is plug and on. There is light but streamly dimmed very light in color. Practically invisible. My husband looked at it and believes is the plug it self. The machine it self works. Try to back it up a bit, push it back again,move it right and left up and down, made sure the plug is in all the way. even change the fuse. Thanks, Dear. Carmen Link to comment Share on other sites More sharing options...
Mary Beth Posted October 29, 2007 Report Share Posted October 29, 2007 Carmen, You might want to give Amy a call at the factory. Sometimes the tip of my light works it\'s way off a little and my light looks strange. I just push it back on and the light is back to normal. Yours sounds like it could be a little more involved than that if you and your DH have been trying to fix it. Amy will help you, she is good. Link to comment Share on other sites More sharing options...
carmen Posted October 29, 2007 Author Report Share Posted October 29, 2007 Hi Mary Beth, I talk to Amy and they are sending me a new module. Thanks again for your help Carmen Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.