Neher-in-law5 Posted December 29, 2007 Report Share Posted December 29, 2007 I was working with George yesterday quilting three baby quilts. The first two were matching and I used King Tut thread in top and bottom. It worked with no problem. The third one was a white on white large sashing that I quilted through using a poly by Superior and the same King Tut in the bobbin as the first two. The top thread keeps breaking every so often so I don't know what to try to adjust. I finally gave George and myself a break and will go back to it later today. What thread do you like in your George and why. Link to comment Share on other sites More sharing options...
cbear Posted December 30, 2007 Report Share Posted December 30, 2007 I had a problem with the top thread breaking, but I was using Superior\'s Masterpiece 60/2 cotton thread. To get nice stitching on the back, the top tension was just tight enough to break. After a lot of experimenting I loosened my bobbin tension and finally was able to sew a decent stitch top and bottom with no breakage. If you can\'t get a decent stitch on the back by loosening the top tension enough for the top thread to stop breaking, you might try adjusting your bobbin tension a little. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.