nora123 Posted April 5, 2008 Report Share Posted April 5, 2008 Hi everyone, does anyone know what the screw directly across from the screw that adjust your neeld up down is for. they look alike except one screws in from the top and one from the side. I had to replacee both of my circuit boards and I was just wondering. I have to replace the SR sensor too as the racing all by itself is still happening. At least my channel locks are not turning on and off by themselves anymore. Has anyone changed their SR sensor located directly under the panto side housing?. If so can you give me any pointers. I have the hand out amy sent me but just in case there is some step. The mother and daughter boards were very easy. Thanks a bunch. Nora Millennium Washougal WA Link to comment Share on other sites More sharing options...
PattyJo Posted April 5, 2008 Report Share Posted April 5, 2008 Hi Nora, I\'ve never had to re-do the SR sensor, but it sounds like you\'ll know every inch of your machine before your through with this. I\'ll be praying for you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.