Shanna Posted September 21, 2005 Report Share Posted September 21, 2005 I am sewing with Superior Rainbow thread. I can't keep it in the thread guide in front of the tension dial. I sew along and then it jumps out and the thread then breaks. Anybody else have this problem? Shanna in Southern Iowa Liberty Link to comment Share on other sites More sharing options...
SherryRogers Posted September 22, 2005 Report Share Posted September 22, 2005 Hi Shanna Check to see that the 3 hole thread guide is oriented correctly. It should be at approx 7-2 o'clock (if it were the hands of a clock). You could also check to make sure that your thread is seated all the way in the disks of the tension unit. Hope this helps! Link to comment Share on other sites More sharing options...
jeri Posted September 22, 2005 Report Share Posted September 22, 2005 Thanks for the tip about the thread guide. Mine has been sitting at about 2:00 since I bought my machine 3 years ago. I'm having problems with thread jumping out of the bottom thread guide (by the needle) when stitching slow straight lines ie: SID, cross hatching etc. I'm going to try turning the 3 hole guide today and see if it stops the aggrevating problem. jeri Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.