Pat Kuhlman Posted July 10, 2008 Report Share Posted July 10, 2008 I have a Millie on the first line of panto machine will drag and is sluggish but on the second line it moves just fine what can I do to correct problem? Thanks in advance Pat Link to comment Share on other sites More sharing options...
lizziesgirl Posted July 10, 2008 Report Share Posted July 10, 2008 I had the same thing happen. Check to see if your table is level. Mine was just slightly off in the center at the back. Lowered the truss adjusting bolt just a little and that seemed to help. While I was behind the machine I got eye level with the wheels and slowly moved the machine sideways and noticed that the right wheel while facing the back of the machine was dragging slightly. Adjusted the front wheel opposite that one, just slightly, and now it just zippes. Hope this works for you. Link to comment Share on other sites More sharing options...
Pat Kuhlman Posted July 11, 2008 Author Report Share Posted July 11, 2008 I am going to try that right now thank you Paat Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.