tholder51 Posted November 10, 2008 Report Share Posted November 10, 2008 I have a Millinium longaem machine How do you set more stitches per inch in the stitch regulator mode? I need more stitches per inch. I also need to know how to attach zippers to the quilting machine . If any body has direction how to do this I would like to know. Thanks Link to comment Share on other sites More sharing options...
Belbelle Posted November 10, 2008 Report Share Posted November 10, 2008 Using your right hand control, hold in command button and the green button. The needle on the "speed" indicator on the front of the machine will show you the stitches per inch. Link to comment Share on other sites More sharing options...
Quilting Heidi Posted November 10, 2008 Report Share Posted November 10, 2008 Julie is right on the increase. If you find you need to decrease then you would hold the control and red. You can do this as your stitching as well. Takes a little practice but I"ve found it useful. Link to comment Share on other sites More sharing options...
smorris Posted November 10, 2008 Report Share Posted November 10, 2008 Hi "the older 51" Don't forget that when you turn you machine off the stitch length goes back down to zero, so every time you turn the machine on you will have to reset the stitch length. Do you have a manual for your machine? APQS have their manuals on DVD now, if you don't have one, you might like to give them a call. Best wishes Sue in Australia Link to comment Share on other sites More sharing options...
DebFigved Posted November 11, 2008 Report Share Posted November 11, 2008 Check with Sue Schmeiden. She originated the QuickZipSystem. http://www.longarmconnection.com/Our_Products.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.