Jump to content

Extended baseplate


Recommended Posts

I use the extended baseplate. I got it from APQS but can't tell you who it is from. I find it to be a must for ruler work. When I first got it I had a problem that it kept hitting the bar in front. Turns out that I did not have my table leveled properly so it helped me in more ways than one. My quilting was much better once I got my table leveled :).

p.s. - I have a Lenni.

Link to comment
Share on other sites

This one is different from the metal one I have seen on a Gammill in that it is clear acrylic. Also, it snaps on so the needle plate does not have to be removed. The metal one I saw on the Gammill did the same thing - had a lever on the bottom to snap it on but wasn't acrylic. These differences seem to be an advantage over the older models so I'm going to give it a whirl! The base is not cheap so I hope it works as good as the metal ones. Thank you for your input, Roberta and I hope this day finds you happily quilting.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...