LinneaMarie Posted March 6, 2009 Report Share Posted March 6, 2009 Ok, I'm trying to change my wheels and put the edgeriders on. Why is the %&(*% sprocket riveted onto the black wheel? And how the heck am I supposed to get it off w/o damaging the sprocket?:mad: :mad::mad: I can't even get a thin screwdriver between the sprocket and wheel. Thanks girls, and guys!! Link to comment Share on other sites More sharing options...
quiltmonkey Posted March 6, 2009 Report Share Posted March 6, 2009 Wait and be patient. Someone will pop in to help you! Link to comment Share on other sites More sharing options...
Guest mark Posted March 6, 2009 Report Share Posted March 6, 2009 Hi Linnea, The sprocket is held on to the wheel with 2 allen head screws. So you need an allen wrench to uncrew them and the sprocket will come right off the black wheel. You then will reuse them to screw the sprocket onto the Edgerider wheel that is drilled and tapped with the holes in it. Good luck! Link to comment Share on other sites More sharing options...
smorris Posted March 6, 2009 Report Share Posted March 6, 2009 After you've installed the edgeriders, check the clearance between your levelling bar and the base of the machine! sue in australia Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.