ThomChris Posted September 16, 2009 Report Share Posted September 16, 2009 I see the fixes for the Millenium, but we have a liberty. The needle keeps going after I want the needle to go up. Where is the adjustment for the Liberty Link to comment Share on other sites More sharing options...
Stagecl Posted September 17, 2009 Report Share Posted September 17, 2009 I do believe the adjustment is the same for the liberty. I have one too along with a freedom. Give Amy a call at APQS...she is awesome to work with and can answer your question. I believe it is the #8 screw that need adjustment. Link to comment Share on other sites More sharing options...
Katydids Posted September 17, 2009 Report Share Posted September 17, 2009 yes, it is the #8 screw also on the Liberty. I don't believe that the Liberty's have the circuit boards in the back like they are now on the newer machines. It would depend though, on what year your Liberty is. It should be under the top hood on an '07 and earlier model. The part that slants upward toward the back of the machine. You unscrew the first 2 screws on both sides of the hood and loosen the 3rd one and then raise the hood up. The screw will be on a blue tower and marked #8. It is on the right side when facing the front of the machine. Link to comment Share on other sites More sharing options...
ThomChris Posted September 18, 2009 Author Report Share Posted September 18, 2009 Thanks for your input! I'll check it out and let you know. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.