cristina68 Posted June 23, 2006 Report Share Posted June 23, 2006 Hello, I?ve received my circle lord 3 days ago and now I don?t know what I?m doing wrong but once I?ve raised the carriage, one of the long black bars the one that is usually inside the head of the machine and holds the quilts tight is against the machine so I cannot move the machine easily. Sorry about my broken English but I don?t know what to do with it. It?s impossible to raise the carriage and not to touch the bars with the machine. Can anyone help me? Thanks Cris Link to comment Share on other sites More sharing options...
Katydids Posted June 23, 2006 Report Share Posted June 23, 2006 Hi Christina, You need to raise the leveler bar (the black bar inside the machine head, as you say). Unscrew it from the left side (facing the front) and take the pole off. You can then unscrew the silver bolt things on the end of each side of the table that hold the bar. Unscrew them most of the way out but make sure they are even and then put the leveler bar back on. This raises it up to accomodate the Circle Lord. Hope this helps. Patty Link to comment Share on other sites More sharing options...
cristina68 Posted June 23, 2006 Author Report Share Posted June 23, 2006 Dear Patty, Thank you very much. I will do it tomorrow. Best wishes, Cris Seville, Spain Millenium Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.