KDquilter Posted March 21, 2010 Report Share Posted March 21, 2010 Today my husband installed my edgerider wheels!!! Woo Hoo!!! I love them. Very smoth - wish I would have put them on before I did my whole cloth quilt. Link to comment Share on other sites More sharing options...
Katydids Posted March 22, 2010 Report Share Posted March 22, 2010 Great to hear Karie. One thing I might suggest is to check the cams on the carriage front. The old wheels like a setting around 9:00, but the edgeriders like to be set around 12:00 for the optimum ride. Link to comment Share on other sites More sharing options...
KDquilter Posted March 22, 2010 Author Report Share Posted March 22, 2010 Thanks so much. Link to comment Share on other sites More sharing options...
Busy Quilting Posted March 22, 2010 Report Share Posted March 22, 2010 Is that only for the carriage setting they should now be at 12 noon. That is the first I have heard. What about the table setting? Although I like the way mine is mocing with my present settings. Lyn Link to comment Share on other sites More sharing options...
Katydids Posted March 22, 2010 Report Share Posted March 22, 2010 Lyn, yes, for the carriage setting only. The cams on the front of the carriage, which is the side to side movement on the table. If yours are set differently and you are not getting any drag on your side to side movement, then that is fine. Keep them as they are. It doesn't say this in the directions. It is just what I have found to get the best position (and movement) as shown in figure "A" in the directions. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.