quiltingyion Posted August 25, 2011 Report Share Posted August 25, 2011 For the 1 1/4" x 5/8" shoulder bolts used to release the rollers, what is the size of the Allen Wrench you may need to losen the bolt? It appears to be 8mm, but I'm not sure. Thanks. Link to comment Share on other sites More sharing options...
barbm Posted August 25, 2011 Report Share Posted August 25, 2011 Are you talking about the large "bolts" that screw into the ends of the rollers, through the hyme joints? I think it's a 1/2 inch allen wrench - will go check my tool kit. I'm pretty sure that it should be a non-metric wrench. Link to comment Share on other sites More sharing options...
quiltingyion Posted August 25, 2011 Author Report Share Posted August 25, 2011 I know 8mm is very close --- but it seems to fit just a little too snug. I'm guessing it might be 5/16" (which is REAL close to 8mm). Ann Link to comment Share on other sites More sharing options...
Beachside Quilter Posted August 25, 2011 Report Share Posted August 25, 2011 It is 5/16"!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.