tleduke Posted April 17, 2018 Report Share Posted April 17, 2018 I have an APQS Lenni and I use Glide on the top and prewound FilTec bobbins. Every time I have to change bobbins, I can't get it to stitch properly. I have changed the needle, rethreaded the machine many times, cleaned and oiled the bobbin case. This picture is the underside of the quilt. I'm SO frustrated! Of course it's a rush order..... Link to comment Share on other sites More sharing options...
srichardson Posted April 17, 2018 Report Share Posted April 17, 2018 Have you dropped your bobbin case? If you have one try a different bobbin case and see if that helps. What happens if you use a bobbin that you have wound rather than a pre wound? If it is just one batch of pre wounds that you having trouble with it is possible that they may be at fault. The bobbin spring does need to be removed if you are using the magnetic FilTec bobbins. Link to comment Share on other sites More sharing options...
jimerickson Posted April 17, 2018 Report Share Posted April 17, 2018 Try spooling off about 3 yards of thread on the bobbin before you start. The bobbins may be just a little bit too full. Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.