dtsobel Posted May 21, 2020 Report Share Posted May 21, 2020 I'm having tension issues on Millie which is very unusual. I've gone through a bunch of troubleshooting steps. I noticed that the check spring amount of stiffness is really light. it is just very soft. Is this normal or is the spring finished? Thanks Doug Link to comment Share on other sites More sharing options...
jimerickson Posted May 26, 2020 Report Share Posted May 26, 2020 It sounds like the spring tension might be the issue. You can tighten the spring tension by removing the tension assembly, loosening the set screw, rotating it against the spring, tightening up the set screw and replacing it in the machine. When you return the assembly to the machine, make sure that the spring is set at the 10:30/11:00 position when it is "resting". Good luck. Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now